Fire Damage Restoration in Costa Mesa — 24/7 Dispatch, Board-Up the Same Day

Trusted Fire Damage Restoration for Costa Mesa Homeowners

Fire damage restoration in Costa Mesa typically costs between $2,800 and $12,000 depending on the size of the fire, what burned, and how far smoke traveled through the structure. Most homeowners file an insurance claim, and we coordinate directly with adjusters throughout the process. Oxford Restoration Co, led by Noel Carrasco, has served Orange County homeowners with IICRC-certified fire damage restoration for years. We respond to calls in Costa Mesa, including Eastside, Westside, Mesa Verde, and College Park, with same-day assessments when smoke is still fresh and spreading. Call (877) 265-8058 for immediate dispatch.

Fire Damage Restoration Company

Fire Damage Restoration Company means a specialized contractor that handles the full aftermath of a structure fire: board-up, debris removal, soot cleanup, smoke odor elimination, structural drying, and rebuilding damaged areas. You need one the moment the fire is out because smoke residue becomes harder to remove every hour it sits on surfaces. Oxford Restoration Co performs every phase of the restoration to IICRC standards, using the same industrial-grade equipment found in large commercial restoration firms. Fire damage restoration in Costa Mesa generally ranges from $2,800 for a contained kitchen fire to $12,000 or more for whole-home fires with structural damage, depending on square footage and what materials burned.

Why Certification Matters

The IICRC certification means our crew follows the restoration industry’s established protocols, not a set of internal shortcuts. That standard dictates how soot gets removed from different surfaces, how odor gets neutralized rather than masked, and how much demolition is actually necessary. Without it, you’re gambling on a guess.

The Oxford Restoration Co Difference

We’re a specialist, not a generalist. A general contractor might be able to patch drywall after a fire, but they rarely have the thermal foggers, air scrubbers, and hydroxyl generators needed to genuinely eliminate smoke odor that has penetrated wall cavities and insulation.

Smoke Damage Restoration

Smoke Damage Restoration is the process of removing smoke residue, soot deposits, and the accompanying odor from every surface in a structure after a fire. You need it even when the fire itself was small because smoke particles travel far beyond the flame zone and embed themselves in carpets, curtains, walls, and HVAC ductwork. Oxford Restoration Co uses HEPA air scrubbers from XPOWER and B-Air to filter airborne particulates while technicians hand-clean every affected surface with professional-grade chemical agents matched to the specific type of smoke, whether it’s wet smoke from smoldering synthetics or dry smoke from fast-burning paper and wood. The cost of smoke damage restoration in Costa Mesa typically falls between $1,500 and $6,000 depending on affected square footage and penetration depth.

Where Smoke Actually Goes

Smoke follows airflow. In Costa Mesa homes near the coast, that means it moves through open windows, up stairwells, and into the attic through ceiling penetrations. We inspect the full path, not just the room where the fire started, because residual smoke particles in the HVAC system will recirculate odor for months if left untreated.

Equipment That Makes a Difference

Our XPOWER air scrubbers and B-Air negative air machines create a pressure differential that draws contaminated air through HEPA filtration instead of letting it settle back onto surfaces. That’s the same approach used in hospitals and commercial restoration projects, and it’s why our odor removal holds up over time.

Fire Damage Repair

Fire Damage Repair is the structural and cosmetic restoration of a home after fire has weakened framing, charred drywall, cracked tile, or damaged electrical, plumbing, and roofing components. You need it once the emergency cleanup phase is complete and the property is stabilized. Oxford Restoration Co rebuilds damaged areas to pre-loss condition, coordinating with your insurer on scope and budget, and works to IICRC standards throughout. Repair costs in Costa Mesa commonly range from $2,000 to $20,000 or more, driven by materials, code upgrades, and the type of construction in your home, with older beach-adjacent homes often requiring more extensive framing and electrical work.

Structural Integrity First

Charred framing may look intact but have lost significant load-bearing capacity. We inspect studs, joists, and rafters by removal of surface char, checking for cracks and deflection before any cosmetic work begins. Rushing past this step with drywall and paint is exactly how you end up with latent problems nobody sees until it’s too late.

Coordinating With Your Adjuster

We work directly with insurance adjusters, providing photo-documented assessments and a written scope before work begins. That documentation matters when you’re dealing with a claim, and it keeps every party aligned on what actually needs to be done, rather than what a rushed estimate might miss.

Fire Damage Cleanup

Fire Damage Cleanup is the initial physical removal of debris, charred content, and loose soot from the property before the deeper restoration work begins. You need it urgently because acidic soot byproducts begin etching glass, corroding metal fixtures, and permanently staining porous materials within hours to days after a fire. Oxford Restoration Co handles the full cleanup phase from emergency board-up through final wipe-down of surfaces, using professional containment to keep soot from spreading to unaffected rooms during the process. Costa Mesa fire damage cleanup typically costs between $1,200 and $5,000 depending on the volume of debris and the extent of content salvage required.

Content Triage in Every Room

Not everything in a fire needs to go to the landfill. We triage contents room by room, separating salvageable items, items that need specialized cleaning, and items that are too damaged by heat, soot, or water to restore. That disciplined approach reduces your replacement cost and helps your insurance claim stay accurate.

Protecting Unaffected Areas

One of the biggest mistakes in fire cleanup is letting crews track soot through the rest of the house. We set up containment barriers and negative air pressure zones to keep the damage contained, so rooms that were untouched by fire stay that way through the whole project.

Smoke Odor Removal

Smoke Odor Removal is the specialized process of eliminating smoke smells at the molecular level rather than simply covering them with deodorizers or air fresheners. You need it when the odor persists after initial cleaning, which happens when smoke particles have penetrated porous materials like drywall, insulation, carpet padding, and wood framing. Oxford Restoration Co uses thermal fogging, ozone treatment, and hydroxyl generation, matched to the specific smoke type and affected materials, to neutralize odor instead of masking it. Smoke odor removal in Costa Mesa generally costs from $800 to $3,500 depending on square footage and the depth of penetration into structural materials.

Why Masking Always Fails

Spray deodorizers and scented products sit on top of surfaces, but the odor source lives inside the walls, in the insulation, and in the subfloor. Heat and humidity will pull that smell back out within weeks, which is why you’ll notice it return on warm days or when the furnace kicks on. Our approach neutralizes the particles themselves.

The Thermal Fogging Advantage

Thermal fogging uses a heated chemical fog that penetrates porous materials the same way smoke did originally. It reaches into wall cavities, under baseboards, and behind cabinetry, places that surface cleaning and simple wiping can never touch. The fog chemically bonds with smoke particles and neutralizes them permanently.

Fire and Water Damage Restoration

Fire and Water Damage Restoration is the combined cleanup and reconstruction process that happens after firefighters extinguish a blaze, leaving behind water from hoses, melted plumbing, or a compromised roof. You need it because the water from firefighting is just as destructive as the fire itself, and treating one while ignoring the other leads to mold growth, structural warping, and long-term damage. Oxford Restoration Co handles both under one specialized roof, meaning you’re not coordinating separate fire and water contractors who may not communicate with each other. Combined fire and water damage restoration in Costa Mesa typically runs from $4,000 to $18,000 depending on the volume of water introduced and the extent of fire damage.

One Single-Source Specialist

When fire and water damage happen together, a single contractor handling both is safer and faster than split responsibility. If one crew extracts water while another does fire cleanup, gaps in communication leave hidden moisture pockets that later become mold. Our teams work the full sequence from water extraction through fire debris removal and structural drying.

Injectidry for Hidden Moisture

After a fire, water travels into wall cavities and under flooring where surface extraction can’t reach it. Our Injectidry systems apply targeted vacuum and air movement inside wall cavities and under cabinets, drying hidden spaces without unnecessary demolition. That means less tear-out, lower repair scope, and a faster return to your home.

Soot Removal

Soot Removal is the careful physical removal of carbon-based residues left behind by fire, which vary in composition depending on what burned and can range from oily and smearing to dry and powdery. You need it because soot is corrosive, and leaving it on metal, glass, stone, or fabric for even a few days causes permanent etching and discoloration that no amount of restoration later can fully reverse. Oxford Restoration Co uses surface-appropriate cleaning methods, from dry chemical sponges on textured drywall to alkaline solutions on painted surfaces and specialized treatments for electronics and textiles. Soot removal in Costa Mesa typically costs between $900 and $4,000 depending on the extent of contamination.

Different Soot Types Need Different Methods

Oily wet soot from burned plastics and synthetics smears if you wipe it wrong, embedding itself deeper into surfaces. Dry soot from paper and wood fires, on the other hand, lifts more easily but spreads into the air during cleaning. We identify the soot type before touching anything, because the wrong first step makes the problem worse.

Delicate Surface Protocols

Porous stone, unsealed wood, and certain metals react differently to soot and to the cleaning agents used on it. Our technicians match their methods to the surface, using pH-appropriate cleaners and controlled pressure to remove soot without damaging what’s underneath. This is the kind of detail that shows up years later in how well your home has held up after restoration.

Brands We Service

Oxford Restoration Co works with equipment from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry, the same professional-grade systems used by large commercial restoration firms. We’ve deployed XPOWER air scrubbers and B-Air negative air machines on hundreds of fire and smoke jobs across Orange County, and our crews are trained on the specific operational and maintenance requirements of these systems. Injectidry is a particular point of strength for us, as cavity drying technology changes the scope of what can be dried in place rather than demolished.

Whether your current equipment is from one of these brands or another manufacturer, our process works with what you have. We don’t insist on any specific brand; we use what performs best for the job. If you’re dealing with a property that has pre-existing restoration equipment from a previous incident, we can assess its condition and integrate it into our remediation plan where appropriate.

Signs You Need a Pro Right Now

• Visible soot on walls, ceilings, or content: Soot is acidic and begins etching surfaces immediately. The longer it sits, the more permanent the damage becomes, and the more expensive your restoration gets.
• A smoky smell that won’t fade with open windows: That means particles have penetrated porous materials like drywall and insulation. Air fresheners and candles will mask it temporarily, but the source remains active and will resurface.
• Water pooling from firefighting efforts: Standing water migrates into subfloors, wall cavities, and under cabinetry. Within 48 to 72 hours, mold becomes a real risk alongside the fire damage you’re already managing.
• Discolored or corroding metal fixtures: When doorknobs, cabinet hardware, or light fixtures show discoloration within days of a fire, it’s a sign that acidic soot is actively corroding surfaces. This process doesn’t stop on its own.
• Charred framing or structural materials exposed: Even if the visible damage looks superficial, heat weakens load-bearing wood. A professional inspection is the only way to know what’s structurally safe and what needs replacement.

Our Process, Step by Step

1. 1
   Assessment and documentation: We arrive on-site, inspect the full extent of fire, smoke, and water damage, and document everything with photographs and written notes. This initial assessment forms the basis of your insurance claim and our written scope of work.
2. 2
   Emergency board-up and containment: We secure the property against weather, trespass, and further damage, then set up containment barriers and negative air pressure to prevent cross-contamination of unaffected rooms.
3. 3
   Water extraction and structural drying: When firefighting water is present, we extract standing water with industrial pumps and deploy drying systems, including Injectidry units for hidden cavities. This step prevents mold from compounding the original loss.
4. 4
   Soot and smoke removal: Using surface-appropriate methods and HEPA filtration, our crew cleans soot from every surface and treats smoke odor at the source with thermal fogging or hydroxyl generation as needed.
5. 5
   Repair and restoration: We rebuild damaged areas to pre-loss condition, from drywall and painting to flooring, cabinetry, and structural components, coordinating with your insurer throughout and confirming the final result meets IICRC standards.

How Much Does Fire Damage Restoration Cost in Costa Mesa?

Our Service Area Near Costa Mesa

Oxford Restoration Co serves Costa Mesa and the surrounding Orange County communities, including Fire Damage Restoration in Newport Beach, Fire Damage Restoration in Huntington Beach, Fountain Valley, Irvine, Santa Ana, Midway City, Tustin, Garden Grove, Westminster, and Laguna Beach. Typical response time for emergency assessments in Costa Mesa and adjacent neighborhoods like Mesa Verde and College Park is under two hours. For homes in the San Joaquin Hills area or toward the coast, we’re on-site typically within the hour. If your home has fire, smoke, or water damage, whether from a kitchen incident, electrical fire, or larger structural event, our home page has more detail on our full restoration process, or visit our Fire Damage Restoration in Costa Mesa page for area-specific guidance.

Frequently Asked Questions About Fire Damage Restoration in Costa Mesa

What is fire damage restoration?

Fire damage restoration is the full process of returning a fire-damaged property to pre-loss condition, including board-up, water extraction, soot and smoke removal, odor neutralization, structural repair, and content cleaning. It goes beyond simple repair by addressing the hidden damage that smoke particles and water from firefighting leave behind. The IICRC establishes the standard for how each step should be performed.

How long does fire damage restoration take?

Most fire damage restoration projects in Costa Mesa take between one and four weeks depending on the extent of the damage and the complexity of the repairs. A small kitchen fire might be completed in five to seven days, while a whole-home fire requiring structural rebuild can extend several months. Your written scope of work will include a projected timeline.

How much does fire damage restoration cost in Costa Mesa?

Fire damage restoration in Costa Mesa typically ranges from $2,800 to $12,000, with larger or more complex projects exceeding that range. Costs depend on square footage, what materials burned, how deeply smoke penetrated the structure, and whether water damage from firefighting is present. Your final cost depends on the written scope, which we provide before any work begins. Call (877) 265-8058 for a free estimate.

Do you service properties with Dri-Eaz or Phoenix equipment already on site?

Yes, we service properties with all major restoration equipment brands, including Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry units. Our crews are trained on these systems and their specific operational requirements. If you have existing equipment from a previous project, we’ll assess its condition and integrate it into our plan where appropriate.

Can you respond to emergencies after hours?

Yes, we maintain emergency availability for fire damage calls in Costa Mesa and throughout Orange County. When a fire has just been extinguished, you need someone on-site within hours, not days, because soot damage and water damage compound quickly. Call (877) 265-8058 and we’ll dispatch a crew for same-day assessment.

Does Oxford Restoration Co offer a warranty on fire damage restoration work?

We stand behind our restoration work and provide a written scope of work before we begin, so you know exactly what’s being done and to what standard. Any questions about warranty terms should be directed to our team during your initial consultation, and we’ll provide details in writing as part of your project documentation.

How should I prepare my Costa Mesa home before your crew arrives?

Before we arrive, keep everyone out of the damaged areas, don’t touch or wipe any soot-covered surfaces (it makes damage worse), and don’t turn on your HVAC system if there’s smoke residue anywhere in the house. If it’s safe, open windows for ventilation. Leave the rest to us, we’ll handle the assessment and start work immediately.

Schedule Your Fire Damage Restoration Service in Costa Mesa Today

Fire damage doesn’t wait, and neither should you. Every hour that passes allows soot to etch deeper, smoke odor to penetrate further, and firefighting water to spread through framing and flooring. Call Oxford Restoration Co now at (877) 265-8058 for a free, no-obligation estimate and same-day response in Costa Mesa. Noel Carrasco and our IICRC-certified team will walk you through the scope, coordinate with your insurer, and start the work that gets your home back.

Written by Noel Carrasco, Owner at Oxford Restoration Co, serving Costa Mesa and surrounding Orange County communities with Fire Damage Restoration – Newport Beach and other IICRC-certified services.