Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration Company in Fontana, CA
Fire damage restoration in Fontana demands more than smoke cleanup. Oxford Restoration Co has served Fontana since 2011, and the jobs we see here share a pattern: Santa Ana winds push embers into roof vents and attic spaces while mid-century tract homes with original framing dry out fast enough to hide structural char. Wind-driven fires, electrical failures in aging panels, and kitchen fires in 1950s-1970s builds all leave smoke that travels through shared wall cavities and slab foundations in ways newer construction would not allow. If you’re standing in a Fontana home after a fire, call (877) 265-8058 now. Every hour smoke residue sits on surfaces, it etches deeper and spreads further.
Why Fontana Homes Are Different
Fontana’s housing stock was built fast. The post-WWII steel boom brought thousands of single-story tract homes online between 1950 and 1975, most with slab-on-grade foundations, stucco over wood frame, and original galvanized plumbing. When fire or water hits these homes, the damage path follows construction patterns that a general contractor from outside the Inland Empire often misreads. Smoke moves through open wall cavities and dropped ceilings rather than stopping at fire-rated barriers that newer 1990s-2000s subdivisions in the 92336 and 92337 hills have. Galvanized supply lines and early copper plumbing fail from the inside out after 50-60 years, and when they do, water follows the slab, wicking up through carpet tack strips and baseboards before anyone notices a stain.
Then there’s the wind. Fontana sits at the base of the Cajon Pass, one of the most reliable wind corridors in Southern California. Santa Ana events routinely lift and peel composition shingles on the older north-side tracts, driving wind-driven rain under roof edges. The result: attic mold and ceiling stains that look exactly like plumbing leaks but trace back to wind-driven moisture intrusion through the roof assembly. A technician who only reads the stain, not the wind pattern, fixes the wrong problem. That’s why restoration in Fontana requires a specialist who understands both the building era and the climate forces acting on it.
Restoration work we handle
Our Main Fontana Services
Three damage types account for nearly every call we take in Fontana, and two of them have dedicated Fontana service pages with full pricing and process detail.
Water Damage Restoration in Fontana
Fontana’s aging galvanized supply lines and slab-on-grade foundations create a specific failure pattern: slow, hidden leaks that migrate under flooring and wick into drywall for days or weeks before detection. Santa Ana winds compound the problem when they lift shingles and drive rain under roof edges. Our Water Damage Restoration in Fontana service uses industrial air movers from XPOWER and B-Air and IICRC-certified drying protocols to chase moisture where it hides, including wall cavities and under-slab migration paths. We dry structures in place using Injectidry systems where possible, avoiding unnecessary demolition on original 1950s framing that’s often more fragile than it looks.
Mold Remediation in Fontana
Fontana’s dry heat creates a false sense of security about mold. The air is dry, but the wind-driven moisture that enters attic spaces and wall cavities during Santa Ana events stays trapped once the wind dies down. Older stucco-on-wood-frame homes with original insulation hold that moisture against framing for weeks. The result is often “dry” attic mold growing on the underside of roof sheathing, invisible from the living space until a ceiling stain appears. Our Mold Remediation in Fontana service includes containment, air scrubbing, source removal, and post-remediation verification, all performed to the IICRC S520 standard. We also identify the water source that fed the growth, because removing mold without fixing the wind-driven leak just schedules a repeat.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Fire Damage Restoration in Fontana
Fire damage restoration in Fontana starts with understanding how smoke and heat behave in mid-century tract construction. Homes built for Kaiser Steel workers between 1950 and 1975 share wall cavities, lack modern fire-blocking, and have original wood framing that’s now 50-70 years old. When a kitchen fire or electrical event occurs, smoke penetrates those open cavities and travels far beyond the burn zone. Santa Ana conditions make it worse: high winds can push embers into attic vents and force smoke through gaps in stucco exteriors, spreading residue into rooms that never saw flame. Fontana fire jobs almost always involve smoke damage beyond the ignition point and often require coordination with roof repairs from wind damage. Oxford Restoration Co handles fire damage restoration, smoke odor removal, and structural repair as a single-source project, using IICRC-certified fire and smoke restoration techniques. For a fuller look at our fire restoration process, see Fire Damage Restoration.
Smoke Damage Restoration
Signs you need it
Yellowed ceilings above the burn area, black soot staining around light fixtures and switch plates, and a persistent acrid odor that returns within hours of airing out the house all indicate smoke particles embedded in porous surfaces.
What it costs in Fontana
Smoke damage restoration in Fontana typically ranges from $2,800 to $8,000 depending on square footage affected and how long residue has sat on surfaces.
How we do it
We contain the affected area, run HEPA air scrubbers to pull suspended particles from the air, dry-sponge walls and ceilings to lift soot without smearing, then clean every surface with IICRC-specified agents matched to the surface type before thermal fogging to neutralize embedded odor.
Smoke Odor Removal
Signs you need it
Odor that persists after surface cleaning, smells that intensify with humidity or when HVAC runs, and odors returning in closets and drawers point to smoke molecules trapped in insulation, framing, and ductwork.
What it costs in Fontana
Smoke odor removal alone typically runs $1,200 to $3,500 in Fontana, though costs rise when ductwork cleaning and attic insulation replacement are required.
How we do it
We identify odor reservoirs with a thorough inspection, run hydroxyl generators or ozone in unoccupied spaces, clean or replace HVAC duct components, and apply thermal fogging or vapor modification to penetrate porous materials that surface cleaning cannot reach.
Fire Damage Cleanup
Signs you need it
Visible char, water-soaked flooring or drywall from firefighting efforts, ash, and debris across multiple rooms all require professional fire damage cleanup before restoration work can begin.
What it costs in Fontana
Fire damage cleanup in Fontana typically costs $1,900 to $6,000, with higher costs when flooring removal, water extraction, or content manipulation is required.
How we do it
We remove debris, extract standing water from fire suppression, cut out unsalvageable drywall and insulation, dry the remaining structure with industrial air movers from B-Air and XPOWER, and document everything with photos for your insurance claim.
What Fire Damage Restoration Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Fire damage cleanup | $1,900 – $6,000 |
| Smoke damage restoration | $2,800 – $8,000 |
| Smoke odor removal | $1,200 – $3,500 |
Fontana fire jobs trend toward the higher end when wind-driven smoke has penetrated multiple rooms through shared wall cavities, or when firefighting water has soaked original slab-on-grade flooring. Santa Ana conditions during the fire also push cleanup scope up, because wind pressure forces smoke deeper into wall assemblies.
How long does fire damage restoration take in Fontana?
Most Fontana fire damage restoration projects complete in 5 to 14 days. Cleanup and smoke work typically take 2-4 days, while structural repair, drying, and final verification extend the timeline based on scope. Wind-driven smoke in shared wall cavities adds time because more surfaces require odor treatment.
Will my insurance cover fire damage restoration in Fontana?
Most homeowner policies cover fire and smoke damage restoration, including water damage from firefighting. We document all damage with photos, provide a written scope before work starts, and coordinate directly with your adjuster. Call (877) 265-8058 and we’ll help you understand your coverage.
Brands We Service in Fontana
Oxford Restoration Co works on equipment across major manufacturers, including Dri-Eaz dehumidifiers, Phoenix air movers, XPOWER air scrubbers, and B-Air drying systems. Most replacement parts are stocked locally or available same-day through our Inland Empire supply network. See our brands for a full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Restoration Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Fire damage cleanup | $1,900 – $6,000 |
| Smoke damage restoration | $2,800 – $8,000 |
| Smoke odor removal | $1,200 – $3,500 |
| Water damage restoration (basic) | $1,800 – $4,500 |
| Extensive water damage with structural drying | $5,000 – $15,000 |
| Sewage or black water extraction | $2,000 – $6,500 |
| Mold inspection & testing | $300 – $600 |
| Contained mold removal (10×10 area) | $1,500 – $5,000 |
| Whole-home mold remediation | $10,000 – $30,000+ |
Fontana pricing runs higher when original 1950s-1970s materials require specialty handling, when slab foundations hide water migration that demands extended drying, or when Santa Ana wind damage must be addressed before restoration can begin. Every project gets a written scope and pricing before we start, so you know exactly what you’re approving.
Neighborhoods We Serve in Fontana
Oxford Restoration Co covers all of Fontana, from the original steel-mill-era tracts north of Foothill Boulevard to the newer subdivisions in the 92336 and 92337 zip codes and the south side. We typically reach most Fontana addresses within 90 minutes of your call.
- Downtown Fontana and the older north-side tracts along Sierra Avenue
- Southridge and the 1990s-2000s subdivisions near Jurupa Hills
- Walnut Village and the central Fontana corridor
- West End neighborhoods along the Rialto border
- North Fontana and the foothill communities below the Cajon Pass
Service Area – Cities Near Fontana
Beyond Fontana proper, Oxford Restoration Co regularly handles restoration jobs in the surrounding Inland Empire communities. We serve Bloomington, CA to the west, Rialto, CA to the north, Glen Avon, CA to the southwest, and Pedley, CA across the Santa Ana River. If you’re just outside Fontana and dealing with water, fire, or mold damage, call us and we’ll confirm coverage for your address.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Restoration Company in Fontana
We typically arrive at most Fontana addresses within 90 minutes of your call. Response time depends on traffic through the Cajon Pass corridor and current dispatch load. For active water intrusion or fire aftermath, call (877) 265-8058 immediately and we’ll give you a real arrival window.
Most water mitigation, mold remediation, and smoke cleanup work does not require a city permit. Structural repairs, electrical work, and roof replacement following fire or wind damage typically do. We coordinate permit requirements with the City of Fontana as part of the project scope, and your written estimate identifies any permit needs before work begins.
We cover all Fontana zip codes: 92335, 92336, 92337, and 92331. We also serve Bloomington, Rialto, Glen Avon, and Pedley. If you’re within a 30-minute drive of central Fontana, call (877) 265-8058 and we’ll confirm coverage for your specific address.
For fire damage, water intrusion, or mold problems in Fontana, call Oxford Restoration Co at (877) 265-8058 for a free estimate. We’ll assess the damage, document everything for your insurance, and give you a written scope before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local damage restoration pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Third party air clearance test at the end, at their suggestion, so we had proof rather than just their word."
— Miguel Hernandez"Post fire smoke damage. The smell that I was sure was permanent is completely gone."
— Dustin Delaney"Took moisture readings every day and logged them, and only pulled the drying equipment when the numbers said it was actually dry rather than on a fixed schedule."
— Jamal Grant